c-24.2, r. 3.1 - Approval of the cameras used to photograph the registration plates of road vehicles crossing bridge P-15020 on Autoroute 25

Updated to 26 March 2015

This document has official status.

chapter C-24.2, r. 3.1

Approval of the cameras used to photograph the registration plates of road vehicles crossing bridge P-15020 on Autoroute 25

Highway Safety Code

(chapter C-24.2, s. 595.1).

1. The cameras used to photograph the registration plates of road vehicles crossing bridge P-15020 on Autoroute 25, manufactured by Transcore, are approved, the main components of which being as follows:

(a)  fully-redundant zone controller with detection by suspended laser scanner (LMS 211 or LMS 511-10100 by SICK AG) and by magnetic induction loops (SmartToll® by Peek Traffic Corporation and technologie Idris®);

(b)  electronic toll system with identification by radio frequency by Transcore, including in particular antennas (AA3152 by Transcore), multiprotocol readers (Encompass®6 by Transcore) and transponders (eGo Plus by Transcore);

(c)  camera identification system (VIS-CAM 500 3015330 and 3015331 by JAI Inc.) and camera monitoring (P1343 or P1353 by Axis).

M.O. 2011-05, s. 1; M.O. 2015-01, s. 1.

2. (Omitted).

M.O. 2011-05, s. 2.

REFERENCES

M.O. 2011-05, 2011 G.O. 2, 1071

M.O. 2015-01, 2015 G.O. 2, 319