Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
C-42 - Timber-Driving Companies Act
Section 48
Disposition versions
48. The tolls to be collected upon different kinds of timber shall be as follows, viz:
cts
Red and white pine, tamarack, spruce and hemlock, square or waney
board, per 6.75 m3 .................................................. 0.050
Oak, elm or other hard wood, square or flatted or waney board, per
6.75 m3 ............................................................. 0.080
Saw-logs, 5.20 m or under in length, per 6.75 m3..................... 0.008
Red and white pine, tamarack, spruce and hemlock, round or flatted,
over 5.10 m and under 9.10 m long, per 6.75 m3 ...................... 0.100
Red and white pine, tamarack, spruce and hemlock, round or flatted,
9.10 m and upwards in length, per 6.75 m3 ........................... 0.120
Sawed lumber, per 6.75 m3 ........................................... 0.023
Staves, per 6.75 m3 ................................................. 0.120
Cords of wood, shingle bolts and other lumber, per 6.75 m3 .......... 0.028
Spars, per piece .................................................... 0.030
Masts, per piece .................................................... 0.050
Railway ties other than cedar, in 2.40 m or 4.80 m lengths, per
length of 2.40 m .................................................... 0.004
Cedar, round or flatted, 2.40 m long or under, per piece ............ 0.003
Cedar, round or flatted, over 2.40 m and under 5.20 m long, per
piece ............................................................... 0.006
Cedar, round or flatted, 5.20 m and under 7.60 m long, per piece .... 0.009
Cedar, round or flatted, 7.70 m and under 10.70 m long, per piece ... 0.002
Cedar, round or flatted, 10.70 m and upwards in length, per piece ... 0.003
Red and white pine, tamarack, spruce and hemlock, square or waney
board, per 6.75 m3 .................................................. 0.050
Oak, elm or other hard wood, square or flatted or waney board, per
6.75 m3 ............................................................. 0.080
Saw-logs, 5.20 m or under in length, per 6.75 m3..................... 0.008
Red and white pine, tamarack, spruce and hemlock, round or flatted,
over 5.10 m and under 9.10 m long, per 6.75 m3 ...................... 0.100
Red and white pine, tamarack, spruce and hemlock, round or flatted,
9.10 m and upwards in length, per 6.75 m3 ........................... 0.120
Sawed lumber, per 6.75 m3 ........................................... 0.023
Staves, per 6.75 m3 ................................................. 0.120
Cords of wood, shingle bolts and other lumber, per 6.75 m3 .......... 0.028
Spars, per piece .................................................... 0.030
Masts, per piece .................................................... 0.050
Railway ties other than cedar, in 2.40 m or 4.80 m lengths, per
length of 2.40 m .................................................... 0.004
Cedar, round or flatted, 2.40 m long or under, per piece ............ 0.003
Cedar, round or flatted, over 2.40 m and under 5.20 m long, per
piece ............................................................... 0.006
Cedar, round or flatted, 5.20 m and under 7.60 m long, per piece .... 0.009
Cedar, round or flatted, 7.70 m and under 10.70 m long, per piece ... 0.002
Cedar, round or flatted, 10.70 m and upwards in length, per piece ... 0.003
48. The tolls to be collected upon different kinds of timber shall be as follows, viz:
