308. The owner must record and maintain, for each amusement ride or device, a log book or append thereto, as the case may be, for the life of each amusement ride or device, the following information and documents:(1) the amusement ride or device name, the manufacturer’s name and the serial number;
(2) the number of the identification plate issued by the Board;
(3) the rated capacity and the maximum speed specified by the manufacturer;
(4) a copy of the plans related to all construction work carried out on the amusement ride or device and all technical information relating to the alterations made to the amusement ride or device;
(5) the manufacturer’s technical manuals and service, maintenance and safety bulletins and the action taken to implement the recommendations contained in the bulletins;
(6) certificates of conformity or safety produced by a recognized person within the meaning of Chapter IX of the Construction Code (chapter B-1.1, r. 2);
(7) the compiling of operating dates and hours;
(8) the nature of alterations made to a safety device or its elimination and the manufacturer’s authorization to that effect;
(9) the location and nature of alterations and weldings made to a mechanical part or a structural member and the welding procedure used;
(10) a list of the daily inspections planned by the manufacturer and inspections made during the assembly and the identification of the person who made them and all rectifications made following the inspections;
(11) the inspection of every portable fire extinguisher and smoke alarm;
(12) the identification of any safety device having interrupted the operation of an amusement ride or device;
(13) the breakdowns, accidents and evacuations that occurred while operating the amusement ride or device;
(14) the replacement or repair of a steel wire rope;
(15) the replacement of a link chain;
(16) remedial notices issued by the Board under section 122 of the Building Act (chapter B-1.1); and
(17) periods during which the amusement ride or device was not used.