The daily report must contain all the elements applicable to the declared day including, in particular,(1) the drilling authorization number;
(2) a description, in chronological order, of the work carried out and the time required to carry out each step of the work;
(3) the name of the enterprises that carried out the work;
(4) the measured depth reached during the day;
(5) the composition of the drilling fluid and the spacer fluid and the volumes used;
(6) the working condition of the blowout prevention system;
(7) a loss of circulation;
(8) the components used to assemble the drill strings;
(9) the specifications of the casing and its setting depth;
(10) the weight applied to the bit and its penetration rate;
(11) the measurements of the deviation of the well path in dip, azimuth and depth;
(12) traces of petroleum or water detected;
(13) the type of pump used and its capacity;
(14) the type of cement used, its density, its additives and their proportions, its setting time and the volume used;
(15) the well logs carried out;
(16) the observations and data related to the evaluation or characterization of the geological formation;
(17) the fluid samples collected;
(18) the results of the pressure and leak tests;
(19) the volume and composition of the gas used, released, incinerated or burnt at the flare;
(20) the composition, concentration and detailed assessment of all the products identified in the technical program that are stored or used on the activity site;
(21) the operational problems encountered and the corrective measures taken or planned;
(22) the indication of any temporary work interruption and the procedure followed to secure the well;
(23) the indication of any event that disrupted the progress of the work; and
(24) any other information or document deemed necessary by the Minister.