Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
S-2.1, r. 9 - Regulation respecting concrete pumps and distribution masts
Schedule
Disposition versions
SCHEDULE II
(s. 56)
GENERAL TESTING OF PUMP-TRUCKS
GENERAL INFORMATION
Name of owner:
Address:
Telephone:
Resource person:
EQUIPMENT IDENTIFICATION
Concrete pump manufacturer:
Model:
Serial number:
Maximum working pressure of pump (in bars):
Maximum pumping rate of concrete (m3/h):
Year of manufacture:
Distribution mast manufacturer:
Model:
Serial number:
Maximum range of mast (in metres):
Maximum diameter of concrete delivery pipes (mm):
Maximum length and diameter of flexible end hose (mm):
Year of manufacture:
Truck manufacturer:
Model:
Serial number:
Licence plate number:
Maximum capacity of outriggers (kN):
Year of manufacture:
IDENTIFICATION OF COMPETENT PERSON:
Name of competent person:
Social Insurance Number:
Trade or profession:
Employer:
Years of experience:
REPORT INFORMATION:
Report number:
Test date:
Reason for test (annual, accident, putting into service, essential modifications):
Recommendation:
PLATES AND MANUALS
__________________________________________________________________________________
| |
| Present |
|__________|
| | |
Item | Yes | No |
|_____|____|
| | |
Instruction panel (s. 16) _____________________________________________|_____|____|
Warning sign - electrical cables (Safety Code for the | | |
construction industry, (s. 5.3.1)) ____________________________________|_____|____|
Sign prohibiting the lifting of loads (s. 24) _________________________|_____|____|
Concrete pump identification plate (s. 4) _____________________________|_____|____|
Distribution mast identification plate (s. 5) _________________________|_____|____|
Outrigger marking (s. 28) _____________________________________________|_____|____|
Delivery pipes identification plate (ss. 8 and 9) _____________________|_____|____|
Manufacturer’s manual (s. 15) _________________________________________|_____|____|
Pump-truck log (s. 51) ________________________________________________|_____|____|
__________________________________________________________________________________
| | | | |
| | (1) | | |
|Inspected | Test |Repaired |Replaced |
|__________|_________|_________|_________|
| | | | |
GENERAL | | | | |
| | | | |
Starting of motors (s. 21): _____________|__________|_________|_________|_________|
Control devices: ________________________|__________|_________|_________|_________|
Hopper grille (conformity | | | | |
and safety mechanism): __________________|__________|_________|_________|_________|
Mast locking mechanism (s. 23): _________|__________|_________|_________|_________|
Protection of valve entry points: _______|__________|_________|_________|_________|
Safety valves: __________________________|__________|_________|_________|_________|
Control panel: __________________________|__________|_________|_________|_________|
Running board: __________________________|__________|_________|_________|_________|
Guard-rail and walkway: _________________|__________|_________|_________|_________|
Lubrication of ball bearings | | | | |
and bolt pins: __________________________|__________|_________|_________|_________|
| | | | |
FRONT OUTRIGGERS | | | | |
| | | | |
Joints and welding | | | | |
(cracked, worn or deformed): ____________|__________|_________|_________|_________|
Hydraulic cylinders: ____________________|__________|_________|_________|_________|
Disks: __________________________________|__________|_________|_________|_________|
Bolt pins and clamps: ___________________|__________|_________|_________|_________|
Functioning: ____________________________|__________|_________|_________|_________|
| | | | |
REAR OUTRIGGERS | | | | |
| | | | |
Joints and welding (cracked, | | | | |
worn or deformed): ______________________|__________|_________|_________|_________|
Hydraulic cylinders: ____________________|__________|_________|_________|_________|
Disks: __________________________________|__________|_________|_________|_________|
Bolt pins and clamps: ___________________|__________|_________|_________|_________|
Functioning: ____________________________|__________|_________|_________|_________|
| | | | |
PIVOT CAB | | | | |
| | | | |
Joints and welding | | | | |
(cracked, worn or deformed): ____________|__________|_________|_________|_________|
Upper ball bearing | | | | |
(maximum allowance (3 mm): ______________|__________|_________|_________|_________|
Lubrication recommended | | | | |
by manufacturer: ________________________|__________|_________|_________|_________|
Anchor bolts (replacement | | | | |
every 3 years): _________________________|__________|_________|_________|_________|
| | | | |
MAIN COLUMN | | | | |
| | | | |
Joints and welding | | | | |
(cracked, worn or deformed): ____________|__________|_________|_________|_________|
Ovalization of coupling | | | | |
eyelet (maximum 1%): ____________________|__________|_________|_________|_________|
Bolt pin and clamp: _____________________|__________|_________|_________|_________|
| | | | |
PEDESTAL | | | | |
| | | | |
Joints and welding | | | | |
(cracked, worn or deformed): ____________|__________|_________|_________|_________|
Tightening of bolts: ____________________|__________|_________|_________|_________|
| | | | |
DISTRIBUTION MAST SECTIONS | | | | |
| | | | |
Joints and welding | | | | |
(cracked, worn or deformed): ____________|__________|_________|_________|_________|
Ball bearing | | | | |
and articulation points: ________________|__________|_________|_________|_________|
Safety bolt pins: _______________________|__________|_________|_________|_________|
Boom hook and assembly: _________________|__________|_________|_________|_________|
Hydraulic cylinders: ____________________|__________|_________|_________|_________|
Mast bearing plates (if applicable): ____|__________|_________|_________|_________|
Extension limit of telescopic | | | | |
boom (if applicable): ___________________|__________|_________|_________|_________|
| | | | |
CONCRETE DELIVERY PIPES | | | | |
| | | | |
Pipe supports: __________________________|__________|_________|_________|_________|
Pipe hooks: _____________________________|__________|_________|_________|_________|
Hitch points for handling: ______________|__________|_________|_________|_________|
Pipe diameter: __________________________|__________|_________|_________|_________|
Safety fastening holding flexible | | | | |
hoses (s. 45): __________________________|__________|_________|_________|_________|
__________________________________________________________
(1) Non-destructive test of member (other than visual).
