208. Where a worker is raised by means of the bucket of a loader, for work other than that mentioned in section 207, the following standards shall be respected:(1) an anti-skid detachable floor anchored to the bucket shall be installed;
(2) the bucket shall be equipped with a mechanism or other means of protection preventing its floor from approaching nearer than 2 m (6.6 ft) to any obstacle located above it;
(3) a valve preventing the sudden descent of the bucket shall be installed;
(4) an anti-dumping locking system shall be installed on the bucket;
(5) the loader shall be equipped with a device preventing the bucket from being raised without the secondary brake being applied;
(6) the lifting operations may be carried out only when the loader’s axles are in a horizontal position;
(7) an operator shall be at the controls of the loader, unless it is equipped with a double control from the bucket;
(8) the worker shall be attached by means of a lanyard complying with sections 5.1 and 6.