Ministère de l'Emploi et de la Solidarité sociale
Consolidated Statutes and Regulations Consolidated Statutes Consolidated Regulations Annual Statutes and Regulations Annual Statutes Annual Regulations Additional information Québec Official Publisher What’s new? Information note Policy of the Minister of Justice Laws: Amendments Laws: Provisions not in force Laws: Provisions brought into force Annual Statutes: PDF versions since 1996 Regulations: Amendments Annual Regulations: PDF versions since 1996 Court Decisions

Q-2, r. 9.01 - Design code of a storm water management system eligible for a declaration of compliance

Section 86
Disposition versions

Full text
86. The inlet and outlet pipes must have a minimum inside diameter of 450 mm and a minimum draining slope of 1% over at least 10 m from the dry retention system. If the draining slope is less than 1%, the minimum inside diameter of the pipe must be at least 525 mm.
O.C. 871-2020, s. 86.
In force: 2020-12-31
86. The inlet and outlet pipes must have a minimum inside diameter of 450 mm and a minimum draining slope of 1% over at least 10 m from the dry retention system. If the draining slope is less than 1%, the minimum inside diameter of the pipe must be at least 525 mm.
O.C. 871-2020, s. 86.
© Gouvernement du Québec