Q-2, r. 46.1 - Regulation respecting a cap-and-trade system for greenhouse gas emission allowances

Section 68 Disposition versions

2012-12-19

68. An emitter that wishes to be issued early reduction credits must send the Minister, not later than 31 May 2013, an application containing the following information and documents:

(1)  the emitter’s name, contact information and account numbers;

(2)  a description of the activities pursued at the emitter’s establishment where the reductions have occurred;

(3)  a description of the reduction project and proof that it meets the conditions set out in sections 65 to 67;

(4)  the dates of the reduction period during which the reductions in GHG emissions occurred;

(5)  the quantity of the GHG emission reduction, in metric tonnes CO2 equivalent, calculated using one of the following methods:

(a)  one of the calculation methods provided for in Schedule A.2 to the Regulation respecting mandatory reporting of certain emissions of contaminants into the atmosphere (chapter Q-2, r. 15);

(b)  a mass balance calculation method, or a method recognized by the industry and meeting the requirements of the ISO 14064-2 standard;

(6)  all the information and documents used to calculate GHG emissions in accordance with paragraph 5;

(7)  a verification report on the project and the reductions, carried out by an organization accredited to ISO 14065 by a member of the International Accreditation Forum under an ISO 17011 program, confirming a reasonable level of assurance under the ISO 14064-3 standard that the reduction meets the conditions of this Chapter;

(8)  the information needed to calculate the maximum quantity of early reduction credits provided for in section 69;

(9)  the signature of the chief officer of the emitter and the date of the application.

O.C. 1297-2011, s. 68; O.C. 1184-2012, s. 43.

2012-09-01

68. An emitter that wishes to be issued early reduction credits must send the Minister, not later than 31 December 2012, an application containing the following information and documents:

(1)  the emitter’s name, contact information, identification number and account numbers;

(2)  a description of the activities pursued at the emitter’s establishment where the reductions have occurred;

(3)  a description of the reduction project and proof that it meets the conditions set out in sections 65 to 67;

(4)  the dates of the reduction period during which the reductions in GHG emissions occurred;

(5)  the quantity of the GHG emission reduction, in metric tonnes CO2 equivalent, calculated using one of the following methods:

(a)  one of the calculation methods provided for in Schedule A.2 to the Regulation respecting mandatory reporting of certain emissions of contaminants into the atmosphere (chapter Q-2, r. 15);

(b)  a mass balance calculation method, or a method recognized by the industry and meeting the requirements of the ISO 14064-2 standard;

(6)  all the information and documents used to calculate GHG emissions in accordance with paragraph 5;

(7)  a verification report on the project and the reductions, carried out by an organization accredited to ISO 14065 by a member of the International Accreditation Forum under an ISO 17011 program, confirming a reasonable level of assurance under the ISO 14064-3 standard that the reduction meets the conditions of this Chapter;

(8)  the information needed to calculate the maximum quantity of early reduction credits provided for in section 69;

(9)  the signature of the chief officer of the emitter and the date of the application.

O.C. 1297-2011, s. 68.