Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
Q-2, r. 17.1 - Regulation respecting the regulatory scheme applying to activities on the basis of their environmental impact
Section 305
Disposition versions
305. In addition to what is required by section 41, a declaration of compliance for an activity referred to in section 304 must include a declaration from an engineer attesting that the replacement or the modification of the apparatus or equipment meets the following objectives:
(1) ongoing compliance with the applicable regulatory standards and with the conditions, restrictions, prohibitions and specific standards set out in the operator’s authorization;
(2) the equivalent or enhanced performance and efficiency of the apparatus or equipment compared to those of the initial apparatus or equipment.
Within 60 days of the replacement or the modification to the apparatus or equipment, the applicant must send the Minister an attestation from an engineer attesting that the work was performed in accordance with the information and documents submitted with the declaration of compliance or, if a change has occurred, an attestation from an engineer certifying that the replacement or modification to the apparatus or equipment meets the objectives set out in subparagraphs 1 and 2 of the first paragraph.
305. In addition to what is required by section 41, a declaration of compliance for an activity referred to in section 304 must include a declaration from an engineer attesting that the modification of the apparatus or equipment meets the following objectives:
(1) ongoing compliance with the applicable regulatory standards and with the conditions, restrictions, prohibitions and specific standards set out in the operator’s authorization;
(2) the equivalent or enhanced performance and efficiency of the apparatus or equipment compared to those of the initial apparatus or equipment.
Within 60 days of the modification to the apparatus or equipment, the applicant must send the Minister an attestation from an engineer attesting that the work was performed in accordance with the information and documents submitted with the declaration of compliance or, if a change has occurred, an attestation from an engineer certifying that the modification to the apparatus or equipment meets the objectives set out in subparagraphs 1 and 2 of the first paragraph.
In force: 2020-12-31
305. In addition to what is required by section 41, a declaration of compliance for an activity referred to in section 304 must include a declaration from an engineer attesting that the modification of the apparatus or equipment meets the following objectives:
(1) ongoing compliance with the applicable regulatory standards and with the conditions, restrictions, prohibitions and specific standards set out in the operator’s authorization;
(2) the equivalent or enhanced performance and efficiency of the apparatus or equipment compared to those of the initial apparatus or equipment.
Within 60 days of the modification to the apparatus or equipment, the applicant must send the Minister an attestation from an engineer attesting that the work was performed in accordance with the information and documents submitted with the declaration of compliance or, if a change has occurred, an attestation from an engineer certifying that the modification to the apparatus or equipment meets the objectives set out in subparagraphs 1 and 2 of the first paragraph.
