I-9, r. 0.1 - Regulation respecting the professional activities that may be engaged in by a professional technologist whose competency is in an engineering technology

Section 11 Disposition versions

2024-02-15

11. A professional technologist may prepare, modify, sign and seal the following documents:

(1)  a distribution plan of an electrical installation within the meaning of the Construction Code (chapter B-1.1, r. 2) that meets the following conditions:

(a)  it is powered only by a public sector electricity distributor;

(b)  it is not located in a care or detention occupancy or a very high-risk industrial occupancy;

(c)  its electric power demand is 120 kVA or less;

(d)  its phase-to-neutral voltage is 120 V or less;

(2)  a load calculation relating to an electrical installation referred to in paragraph 1;

(3)  a wiring or component layout schematic of a control or regulation panel when the following conditions are met:

(a)  the phase-to-neutral voltage of the panel is 120 V or less;

(b)  the schematic is for the assembly of the panel by a manufacturer that is accredited by a certification body recognized by the Régie du bâtiment du Québec;

(4)  a maintenance manual for a control or regulation panel produced by its manufacturer, where the latter is accredited by a certification body recognized by the Régie du bâtiment du Québec and the condition set out in subparagraph a of paragraph 3 is met;

(5)  a marking plan for a public road on which the maximum authorized speed limit is 70 km/h or less, other than a temporary marking plan in a work zone.

O.C. 3-2024, s. 11.

Not in force

In force: 2024-02-15

11. A professional technologist may prepare, modify, sign and seal the following documents:

(1)  a distribution plan of an electrical installation within the meaning of the Construction Code (chapter B-1.1, r. 2) that meets the following conditions:

(a)  it is powered only by a public sector electricity distributor;

(b)  it is not located in a care or detention occupancy or a very high-risk industrial occupancy;

(c)  its electric power demand is 120 kVA or less;

(d)  its phase-to-neutral voltage is 120 V or less;

(2)  a load calculation relating to an electrical installation referred to in paragraph 1;

(3)  a wiring or component layout schematic of a control or regulation panel when the following conditions are met:

(a)  the phase-to-neutral voltage of the panel is 120 V or less;

(b)  the schematic is for the assembly of the panel by a manufacturer that is accredited by a certification body recognized by the Régie du bâtiment du Québec;

(4)  a maintenance manual for a control or regulation panel produced by its manufacturer, where the latter is accredited by a certification body recognized by the Régie du bâtiment du Québec and the condition set out in subparagraph a of paragraph 3 is met;

(5)  a marking plan for a public road on which the maximum authorized speed limit is 70 km/h or less, other than a temporary marking plan in a work zone.

O.C. 3-2024, s. 11.