B-1.1, r. 2 - Construction Code

Section 2.05 Disposition versions

2022-01-08

2.05. A reference in this Chapter to a standard or a code is a reference to that standard or code as adopted by the chapter of the Construction Code or Safety Code (chapter B-1.1, r. 3) or other regulation made under the Building Act (chapter B-1.1) that refers to it.

O.C. 875-2003, s. 1; O.C. 120-2006, ss. 1 and 3; O.C. 991-2018, s. 1; O.C. 1419-2021, s. 2.

2018-11-15

2.05. Unless otherwise provided for, a reference in this Chapter to a standard or code is a reference to that standard or code as adopted by the chapter of the Construction Code (chapter B-1.1, r. 2) or the Safety Code (chapter B-1.1, r. 3) that refers to it.

O.C. 875-2003, s. 1; O.C. 120-2006, ss. 1 and 3; O.C. 991-2018, s. 1.

2012-09-01

2.05. Any appliance or equipment certified by one of the following agencies is deemed to be approved:

(1)  CSA International (CSA);

(2)  the Underwriters’ Laboratories of Canada (ULC);

(3)  Intertek Testing Services NA LTD. (WH, cETL);

(4)  Underwriters Laboratories Incorporated (cUL);

(4.1)  Omni-Test Laboratories, Inc.; and

(5)  any other certification agency accredited by the Standards Council of Canada and whose affixation of a seal or label of approval or of certification of that agency attests compliance with Canadian standards, and that has notified the Régie du bâtiment du Québec of its accreditation.

Any appliance on which a label is affixed certifying that, without being certified by one of the agencies referred to in the first paragraph, that appliance is recognized by one of those agencies as complying with the construction and testing standards of Code d’approbation sur place des composants relatifs au combustible des appareils et appareillages, CAN/CSA-B149.3-05 and of CAN/CSA-B149.3-05, Code for the Field Approval of the Fuel-Related Components on Appliances and Equipment, published by the Canadian Standards Association, as well as to any additional amendment or edition published by that agency, is also deemed to be approved.

However, approval is not required for each component of an appliance where that appliance has received overall approval.

For the purposes of this Chapter, “certification” or “certified” means recognition by one of the agencies referred to in the first paragraph, by means of a label affixed on each certified appliance or equipment certifying that the appliance or equipment complies with the construction and testing requirements published by the standards development organizations accredited by the Standards Council of Canada to develop gas standards.

O.C. 875-2003, s. 1; O.C. 120-2006, ss. 1 and 3.