Consolidated Statutes and Regulations Consolidated Statutes Consolidated Regulations Annual Statutes and Regulations Annual Statutes Annual Regulations Additional information Québec Official Publisher What’s new? Information note Policy of the Minister of Justice Laws: Amendments Laws: Provisions not in force Laws: Provisions brought into force Annual Statutes: PDF versions since 1996 Regulations: Amendments Annual Regulations: PDF versions since 1996 Court Decisions

S-2.1, r. 14 - Regulation respecting occupational health and safety in mines

Section 443.1
Disposition versions

Full text
443.1. To drill a drill hole or a round in a cemented rock fill,
(1)  the drill used must have an enclosed cab that complies with the plans and specifications of an engineer and the cab glass exposed to the risk of rock projection must be covered with metal mesh and of sufficient resistance to ensure worker safety or designed so as to provide safety equivalent to that combination;
(2)  the operator must remain at the controls of the drill for the duration of the drilling.
O.C. 119-2006, s. 33; O.C. 33-2024, s. 17.
443.1. To drill a drill hole or a round in a cemented rock fill,
(1)  the controls of the drill must have a protective screen designed or manufactured according to the plans and specifications of an engineer; and
(2)  the operator must remain at the controls of the drill for the duration of the drilling.
O.C. 119-2006, s. 33.
© Gouvernement du Québec