C-37.02 - Act respecting the Communauté métropolitaine de Québec

Full text
106.2. The Community must adopt a by-law on contract management.
The by-law is applicable to all contracts, including contracts that are not described in any of the subparagraphs of the first paragraph of section 99 or in section 105.2.
The by-law must include
(1)  measures to ensure compliance with any applicable anti-bid-rigging legislation;
(2)  measures to ensure compliance with the Lobbying Transparency and Ethics Act (chapter T-11.011) and the Code of Conduct for Lobbyists (chapter T-11.011, r. 2) adopted under that Act;
(3)  measures to prevent intimidation, influence peddling and corruption;
(4)  measures to prevent conflict of interest situations;
(5)  measures to prevent any other situation likely to compromise the impartiality or objectivity of the call for tenders or the management of the resulting contract;
(6)  measures to govern the making of decisions authorizing the amendment of a contract; and
(7)  measures to promote rotation among prospective contracting parties for contracts that may be made by agreement under the rules adopted under the fourth paragraph and that involve an expenditure of at least $25,000 but below the expenditure threshold for a contract that may be awarded only after a public call for tenders under section 101.
The by-law may prescribe the rules governing the making of contracts that involve an expenditure of at least $25,000 but below the expenditure threshold for a contract that may be awarded only after a public call for tenders under section 101. The rules may vary according to determined categories of contracts. Where such rules are in force, neither the second paragraph of section 99 nor section 100 apply to those contracts.
The by-law, and any other by-law regarding contract management, in particular any by-law delegating the power to incur an expense or make a contract, must be permanently published on the Community’s website.
Not later than 30 days after the day on which a by-law is adopted under this section, the secretary of the Community must send a certified copy of it to the Minister of Municipal Affairs, Regions and Land Occupancy.
The Community shall table a report on the application of the by-law at least once a year at a sitting of the council.
As regards non-compliance with a measure included in the by-law, section 111.2 applies only in the case of a contract for which the contracting process began after the date as of which the measure was included in the by-law.
2010, c. 1, s. 39; 2010, c. 18, s. 73; 2010, c. 42, s. 14; 2016, c. 17, s. 38; 2017, c. 13, s. 135; 2018, c. 8, s. 152.
106.2. The Community must adopt a by-law on contract management.
The by-law is applicable to all contracts, including contracts that are not described in any of the subparagraphs of the first paragraph of section 99 or in section 105.2.
The by-law must include
(1)  measures to ensure compliance with any applicable anti-bid-rigging legislation;
(2)  measures to ensure compliance with the Lobbying Transparency and Ethics Act (chapter T-11.011) and the Code of Conduct for Lobbyists (chapter T-11.011, r. 2) adopted under that Act;
(3)  measures to prevent intimidation, influence peddling and corruption;
(4)  measures to prevent conflict of interest situations;
(5)  measures to prevent any other situation likely to compromise the impartiality or objectivity of the call for tenders or the management of the resulting contract;
(6)  measures to govern the making of decisions authorizing the amendment of a contract; and
(7)  for contracts that involve an expenditure of less than $100,000 and that may be entered into by mutual agreement, measures to ensure rotation among potential contracting parties.
The by-law may prescribe the rules governing the making of contracts that involve an expenditure of at least $25,000 but less than $100,000. The rules may vary according to determined categories of contracts. Where such rules are in force, neither the second paragraph of section 99 nor section 100 apply to those contracts.
The by-law, and any other by-law regarding contract management, in particular any by-law delegating the power to incur an expense or make a contract, must be permanently published on the Community’s website.
Not later than 30 days after the day on which a by-law is adopted under this section, the secretary of the Community must send a certified copy of it to the Minister of Municipal Affairs, Regions and Land Occupancy.
The Community shall table a report on the application of the by-law at least once a year at a sitting of the council.
As regards non-compliance with a measure included in the by-law, section 111.2 applies only in the case of a contract for which the contracting process began after the date as of which the measure was included in the by-law.
2010, c. 1, s. 39; 2010, c. 18, s. 73; 2010, c. 42, s. 14; 2016, c. 17, s. 38; 2017, c. 13, s. 135.
106.2. The Community must adopt a contract management policy.
Such a policy is applicable to all contracts, including contracts that are not described in any of the subparagraphs of the first paragraph of section 99 or in section 105.2.
The contract management policy must include
(1)  (subparagraph repealed);
(2)  measures to promote compliance with any applicable anti-bid-rigging legislation;
(3)  measures to ensure compliance with the Lobbying Transparency and Ethics Act (chapter T-11.011) and the Code of Conduct for Lobbyists (chapter T-11.011, r. 2) adopted under that Act;
(4)  measures to prevent intimidation, influence peddling and corruption;
(5)  measures to prevent conflict of interest situations; and
(6)  measures to prevent any other situation likely to compromise the impartiality or objectivity of the call for tenders or the management of the resulting contract;
(7)  measures to govern the making of decisions authorizing the amendment of a contract.
The Community must make its policy available at all times by publishing it on its website.
It must also make available, in the same manner, any by-law regarding contract management, in particular any by-law delegating the power to incur an expense or make a contract.
Not later than 30 days after the day on which the policy or any resolution amending the policy is adopted, the secretary of the Community must send a certified copy of it to the Minister.
As regards non-compliance with a measure included in the policy, section 111.2 applies only in the case of a contract for which the awarding process began after the date as of which the measure was included in the policy.
2010, c. 1, s. 39; 2010, c. 18, s. 73; 2010, c. 42, s. 14; 2016, c. 17, s. 38.
106.2. The Community must adopt a contract management policy.
Such a policy is applicable to all contracts, including contracts that are not described in any of the subparagraphs of the first paragraph of section 99 or in section 105.2.
The contract management policy must include
(1)  measures to ensure that no tenderer or representative of a tenderer has communicated or attempted to communicate with a member of the selection committee in order to influence the member concerning the call for tenders for which the tenderer or representative submitted a tender;
(2)  measures to promote compliance with any applicable anti-bid-rigging legislation;
(3)  measures to ensure compliance with the Lobbying Transparency and Ethics Act (chapter T-11.011) and the Code of Conduct for Lobbyists (chapter T-11.011, r. 2) adopted under that Act;
(4)  measures to prevent intimidation, influence peddling and corruption;
(5)  measures to prevent conflict of interest situations; and
(6)  measures to prevent any other situation likely to compromise the impartiality or objectivity of the call for tenders or the management of the resulting contract;
(7)  measures to govern the making of decisions authorizing the amendment of a contract.
The Community must make its policy available at all times by publishing it on its website.
Not later than 30 days after the day on which the policy or any resolution amending the policy is adopted, the secretary of the Community must send a certified copy of it to the Minister.
As regards non-compliance with a measure included in the policy, section 111.2 applies only in the case of a contract for which the awarding process began after the date as of which the measure was included in the policy.
2010, c. 1, s. 39; 2010, c. 18, s. 73; 2010, c. 42, s. 14.
106.2. The Community must adopt a contract management policy.
Such a policy is applicable to all contracts, including contracts that are not described in any of the subparagraphs of the first paragraph of section 99 or in section 105.2.
The contract management policy must include
(1)  measures to ensure that no tenderer or representative of a tenderer has communicated or attempted to communicate with a member of the selection committee in order to influence the member concerning the call for tenders for which the tenderer or representative submitted a tender;
(2)  measures to promote compliance with any applicable anti-bid-rigging legislation;
(3)  measures to ensure compliance with the Lobbying Transparency and Ethics Act (chapter T-11.011) and the code of conduct for lobbyists adopted under that Act;
(4)  measures to prevent intimidation, influence peddling and corruption;
(5)  measures to prevent conflict of interest situations; and
(6)  measures to prevent any other situation likely to compromise the impartiality or objectivity of the call for tenders or the management of the resulting contract;
(7)  measures to govern the making of decisions authorizing the amendment of a contract.
The Community must make its policy available at all times by publishing it on its website.
Not later than 30 days after the day on which the policy or any resolution amending the policy is adopted, the secretary of the Community must send a certified copy of it to the Minister.
As regards non-compliance with a measure included in the policy, section 111.2 applies only in the case of a contract for which the awarding process began after the date as of which the measure was included in the policy.
2010, c. 1, s. 39; 2010, c. 18, s. 73; 2010, c. 42, s. 14.
106.2. The Community must adopt a contract management policy.
Such a policy is applicable to all contracts, including contracts that are not described in any of the subparagraphs of the first paragraph of section 99 or in section 105.2.
The contract management policy must include
(1)  measures to ensure that no tenderer or representative of a tenderer has communicated or attempted to communicate with a member of the selection committee in order to influence the member concerning the call for tenders for which the tenderer or representative submitted a tender;
(2)  measures to promote compliance with any applicable anti-bid-rigging legislation;
(3)  measures to ensure compliance with the Lobbying Transparency and Ethics Act (chapter T-11.011) and the code of conduct for lobbyists adopted under that Act;
(4)  measures to prevent intimidation, influence peddling and corruption;
(5)  measures to prevent conflict of interest situations; and
(6)  measures to prevent any other situation likely to compromise the impartiality or objectivity of the call for tenders or the management of the resulting contract;
(7)  measures to govern the making of decisions authorizing the amendment of a contract.
The Community must make its policy available at all times by publishing it on its website.
As regards non-compliance with a measure included in the policy, section 111.2 applies only in the case of a contract for which the awarding process began after the date as of which the measure was included in the policy.
2010, c. 1, s. 39; 2010, c. 18, s. 73.
106.2. The Community must adopt a contract management policy.
Such a policy is applicable to all contracts, including contracts that are not described in any of the subparagraphs of the first paragraph of section 99 or in section 105.2.
The contract management policy must include
(1)  measures to ensure that no tenderer or representative of a tenderer has communicated or attempted to communicate with a member of the selection committee in order to influence the member concerning the call for tenders for which the tenderer or representative submitted a tender;
(2)  measures to promote compliance with any applicable anti-bid-rigging legislation;
(3)  measures to ensure compliance with the Lobbying Transparency and Ethics Act (chapter T-11.011) and the code of conduct for lobbyists adopted under that Act;
(4)  measures to prevent intimidation, influence peddling and corruption;
(5)  measures to prevent conflict of interest situations; and
(6)  measures to prevent any other situation likely to compromise the impartiality or objectivity of the call for tenders or the management of the resulting contract.
The Community must make its policy available at all times by publishing it on its website.
As regards non-compliance with a measure included in the policy, section 111.2 applies only in the case of a contract for which the awarding process began after the date as of which the measure was included in the policy.
2010, c. 1, s. 39.