### Q-2, r. 29 - Regulation respecting halocarbons

11. The owner of a refrigeration or air conditioning unit having a power rating equal to or greater than 20 kW on which a halocarbon leak is detected must immediately
(1)  stop the leak using any appropriate means;
(2)  in the case of a liquid halocarbon, recover the halocarbon that has leaked and remove any material contaminated by the halocarbon that is not cleaned or treated on the premises.
The owner must also, within 48 hours of becoming aware of the defect, have the halocarbon in the part of the unit where the leak has been detected recovered and have the quantity of halocarbons released during the leak assessed by a person referred to in section 44.
In addition, a gaseous halocarbon must be recovered using the appropriate equipment meeting or exceeding AHRI Standard 740-1998 referred to in the third paragraph of section 10.
O.C. 1091-2004, s. 11; O.C. 201-2020, s. 9.
11. The owner of a unit or extinguisher referred to in the second paragraph of section 8, other than a refrigeration or air conditioning unit having a power rating of less than 22 kW, on which a halocarbon leak is detected must immediately
(1)  stop the operation of the unit or extinguisher or, where the unit or extinguisher consists of several parts that can be isolated from one another, isolate the part of the unit where the leak has been detected; and
(2)  in the case of a liquid halocarbon, recover the halocarbon that has leaked and remove any material contaminated by the halocarbon that is not cleaned or treated on the premises.
The owner must also, within 48 hours of becoming aware of the defect, have the halocarbon in the unit or in the part of the unit that was isolated recovered.
In addition, a gaseous halocarbon must be recovered using the appropriate equipment meeting or exceeding ARI Standard 740 referred to in the third paragraph of section 10.
O.C. 1091-2004, s. 11.