B-1.1, r. 3 - Safety Code

Full text
113.1. A petroleum equipment installation must comply with this Chapter, except for
(1)  a petroleum equipment installation intended to store oil to supply a fuel burning appliance or intended to store diesel fuel to supply an engine that must comply with the regulation that was applicable to it at the time of its construction or alteration, with Divisions I to V and XI of this Chapter and with the requirements applicable to the testing of the operating performance, maintenance, use, operation and safety provided for in Divisions VI to VIII of this Chapter;
(2)  a petroleum equipment installation located inside a building and intended to store fuel to supply a fuel distributor or intended to store fuel to supply an engine that must comply with the regulation that was applicable to it at the time of its construction or alteration, with Divisions I to V and XI of this Chapter and with the requirements applicable to the testing of the operating performance, maintenance, use, operation and safety provided for in Divisions VI to IX of this Chapter;
(3)  a pipeline built after 6 April 2018 that must comply with CAN/CSA Standard Z662, Oil and Gas Pipeline Systems, published by the CSA Group, and with Divisions I to V and XI of this Chapter; and
(4)  a portable container and tank that must comply with Sections 4.2 and 4.6 of Division B of the NFCC, National Fire Code of Canada, published by the Canadian Commission on Building and Fire Codes of the National Research Council of Canada, and with subdivisions 1 to 3 of Division VII and with Divisions I to V and XI of this Chapter.
88-2018O.C. 88-2018, s. 7.