B-1.1, r. 3 - Safety Code

Full text
112. In this Chapter, a reference to a regulation other than the Construction Code (chapter B-1.1, r. 2), or a technical standard developed by a body other than the Board, refers to the text applicable at the time of the construction or alteration of the petroleum equipment installation. The foregoing also applies when a section of this Chapter refers to a section of the Construction Code which refers to a technical standard developed by a body other than the Board.
Subject to the first paragraph, a reference in this Chapter to the Construction Code (chapter B-1.1, r. 2) refers, in the case of a petroleum equipment installation built or altered before 1 April 2007, to the provisions of the Construction Code as they read on 1 April 2007 under (O.C. 220-2007, 2007-02-21), and in the case of a petroleum equipment installation built or altered on 1 April 2007 or after that date, to the text applicable at the time of the construction or alteration of the petroleum equipment installation.
Despite the first and second paragraphs, the most recent text, including any amendment, must be applied where reference is made to one of the following standards:
(1)  CFA, “Colour-Symbol System to Mark Equipment and Vehicles for Product Identification”, published by the Canadian Fuels Association;
(2)  CAN/ULC-S676, Standard for Refurbishing of Storage Tanks for Flammable and Combustible Liquids, published by the Underwriters’ Laboratories of Canada;
(3)  CSA B836, Storage, handling and dispensing of aviation fuels at aerodromes, published by the CSA Group;
(4)  CAN/CSA-Z662, Oil and Gas Pipeline Systems, published by the CSA Group, with regard to the maintenance, use, operation and safety requirements;
(5)  NFCC, National Fire Code of Canada, published by the Canadian Commission on Building and Fire Codes of the National Research Council of Canada, with regard to a portable container or tank;
(6)  EPA/530/UST-90/004, Standard Test Procedures for Evaluating Leak Detection Methods: Volumetric Tank Tightness Testing Methods, published by the Environmental Protection Agency;
(7)  EPA/530/UST-90/007, Standard Test Procedures for Evaluating Leak Detection Methods: Statistical Inventory Reconciliation Methods, published by the Environmental Protection Agency;
(8)  NFPA 30, Flammable and Combustible Liquids Code, published by the National Fire Protection Association;
(9)  Transportation of Dangerous Substances Regulation (chapter C-24.2, r. 43).
For the purposes of the third paragraph, amendments and editions of the technical standards published after 7 April 2018 apply to petroleum equipment installations only from the last day of the sixth month following the publication of the French and English versions of those texts. Where those versions are not published at the same time, the period runs from the date of publication of the last version. If the amendments or editions are in one language, the period runs from their publication.
O.C. 221-2007, s. 1; 88-2018O.C. 88-2018, s. 6.
112. The requirements of the referenced documents in this Chapter apply only to the extent that they refer to petroleum equipment.
O.C. 221-2007, s. 1.